Nina and Peter proudly present: Our (first?) electric longboard!
Nina (my sister) made the deck (complete with carp), I was responsible for the electronics.
I wanted to build such a board for years, and as Nina suddenly said the same we started the project immediately. As she knows her way around wood and knows how to draw her part was clear.
First big hurdle for me was the motor mount. Most projects I've found solved this with lots of welding or buying a cheap board from china as a starting point. I didn't really like what I've found until I stumbled upon what Richard from Alien Drive Systems just started selling: A really nice CNC manufactured kit which uses stock trucks and wheels without modifications. And even in Europe, oh joy of joys!
Next: Motor and controller. Playing around with multicopters for years I was quite familiar with the awesomeness that are brushless motors. Very powerful, very light. Deviating from Richards recommendations, I bought motor, ESC (controller), remote and battery from the great chinese RC online shop Hobbyking. After calculating a bit I bought the Turnigy Aerodrive SK3 - 6364-190kv motor, which should be good for a theoretical top speed of 33 km/h with six LiPo cells.
Good enough (After driving this thing flat out I still think that).
As ESC I chose a Turnigy TrackStar 150A which is powerful enough to drive the half kilo of motor and has electric brakes. Battery is a self assembled pack of 6x 5800Ah Lithium-Polymer cells. The motor could cope with ten, but the ESC does not. I planed to build the remote myself but bought a cheap 2.4GHz remote Turnigy HK-210 as temporary solution.
tupperware (for prosciutto I think) on foam rubber which gives just enough space for the battery, access panel, esc and receiver.
First real test happend at a BBQ and the board was really great. Seemingly endless battery power, enough speed to frighten you easily, enough power to climb hills, very controllable, just awesome! Up until the remote just died while driving and a friend of mine needed to jump off at full speed. He lost enough skin to put his hands out of commission for a week but was ok otherwise. A drop of blood is still visible on the grip tape.
Hobbyking refunded my money for the remote and I started to build my own remote based on two Arduinos. I started with RFM12 wireless modules but switched to RF24 after a while. The first thing I've implemented was a failsave.
The shell is a a car remote, stipped down to the handle. I really want to use my 3D printer to print one myself, another sub project from this one.
I like the not-pistol shaped design from the boosted-board controller, but it's a bit small to include all the functionality I want.
|Messy and productive|
|Remote||Arduino based self made|
|ESC||Turnigy TrackStar 150A|
|Motor||Turnigy Aerodrive SK3 - 6364-190kv|
|Battery||6x 5800Ah LiPo 25C|
|Motor mount||Alien Drive Single|
|Wheels||ABEC 11 - 83mm|
|Bearings||BILTIN Bearings - ABEC7|
|Deck||birch wood selfmade 40'|
|Grip tape||clear Black Diamond|
|Battery box||Rosti Mepal Modula tupperware|
All in all around 600€.